The Upper Devonian Kellwasser event recorded in a regressive sequence from inner shelf to lagoonal pond,Catalan Coastal Ranges,Spain     

《Sedimentology》2018,65(6):2055-2087

This study, conducted in the Catalan Coastal Ranges, north‐east Spain, describes the Upper Devonian Kellwasser event in a shallowing‐upward sequence of black shales, siltstones and quartz arenites. This sequence was deposited in a progradational and regressive coastal system where the sedimentary environment evolved from the inner shelf to a lagoonal pond located landward of the shoreline. Three anomalous succeeding steps have been identified by geochemical analysis. The first one, detected on the inner shelf, was characterized by oxygen depletion and high organic productivity. The second, detected in the nearshore, was caused by hydrothermal activity occurring under normal oxic conditions. The third and most intense step was identified in the muds of the lagoonal pond and has been linked to strong anoxic conditions, elevated clastic input derived from changes in the weathering regime at the source area and moderate hydrothermal activity. The Kellwasser event is thus defined in the study area as stepwise and multi‐causal. This is the first time that the Kellwasser event has been identified in a sedimentary environment behind the shoreline. It is also the first time that it has been reported in the Catalan Coastal Ranges.  相似文献   

Three dimensional numerical simulation of residential building on shrink–swell soils in response to climatic conditions          下载免费PDF全文

Xiong Zhang  Jean‐Louis Briaud 《国际地质力学数值与分析法杂志》2015,39(13):1369-1409

Shrink–swell soils can cause distresses in buildings, and every year, the economic loss associated with this problem is huge. This paper presents a comprehensive system for simulating the soil–foundation–building system and its response to daily weather conditions. Weather data include rainfall, solar radiation, air temperature, relative humidity, and wind speed, all of which are readily available from a local weather station or the Internet. These data are used to determine simulation flux boundary conditions. Different methods are proposed to simulate different boundary conditions: bare soil, trees, and vegetation. A coupled hydro‐mechanical stress analysis is used to simulate the volume change of shrink–swell soils due to both mechanical stress and water content variations. Coupled hydro‐mechanical stress‐jointed elements are used to simulate the interaction between the soil and the slab, and general shell elements are used to simulate structural behavior. All the models are combined into one finite element program to predict the entire system's behavior. This paper first described the theory for the simulations. A site in Arlington, Texas, is then selected to demonstrate the application of the proposed system. Simulation results are shown, and a comparison between measured and predicted movements for four footings in Arlington, Texas, over a 2‐year period is presented. Finally, a three‐dimensional simulation is made for a virtual residential building on shrink–swell soils to identify the influence of various factors. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

民采煤窑浅层采空区覆岩应力研究     

郝森  关雨男  王强  胡维哲  田柯 《地质论评》2024,70(S1):224-226

  相似文献   

Enriched finite element procedures for analyzing decoupled bolts installed in rock mass   总被引：1，自引：0，他引：1  

Debasis Deb  Kamal C. Das 《国际地质力学数值与分析法杂志》2011,35(15):1636-1655

Numerical procedures are developed to analyze interaction between fully grouted bolts and rock mass using ‘enriched finite element method (EFEM)’. A solid element intersected by a rock bolt along any arbitrary direction is termed as ‘enriched’ element. The nodes of an enriched element have additional degrees of freedom for determining displacements, stresses developed in the bolt rod. The stiffness of the enriched element is formulated based on properties of rock mass, bolt rod and grout, orientation of the bolt and borehole diameter. Decoupling at grout–bolt interface and elasto‐plastic behavior of rock mass have also been incorporated into the EFEM procedures. The results of this method are compared with analytical pull‐out test results presented by Li and Stillborg (Int. J. Rock Mech. Min. Sci. 1999; 36 :1013–1029). In addition, a numerical example of a bolted tunnel is provided to demonstrate the efficacy of the proposed method for practical applications. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

寒区工程动荷载模型试验系统设计   总被引：1，自引：1，他引：0  

赵淑萍  马巍  焦贵德  罗飞 《冰川冻土》2011,33(4):826-832

寒区工程动荷载模型试验系统主要由模型试验槽、制冷及控温装置、动力加载装置、传感器和数据采集系统四部分组成．系统具有如下特点：能根据实际工程对长3m、宽2．5rn和高1m的模型试验土体进行低温动荷载试验;采用3组冷冻板给土体降温,降温速度快,能提供的最低温度为-20℃,而且能提供多组均匀、稳定的温度边界,冷冻板的温度波动...  相似文献   

冻土中几类力学试验方法的探讨   总被引：3，自引：2，他引：1  

徐湘田  赖远明  刘峰  常小晓  董元宏 《冰川冻土》2011,33(5):1132-1138

获取寒区工程设计中冻土的物理力学指标及冻土本构模型中的模型参数都离不开冻土的力学试验.随着对冻土力学性质研究的深入,需要考察更多加载路径下冻土的力学行为,这也是检验已有冻土本构模型的有效途径.因此,精确的冻土力学试验是认识冻土力学性质的基本手段.为进一步考察冻土的力学性质,提高冻土力学试验的精度,应用MTS-810低温...  相似文献   

利用抗剪强度计算地基承载力特征值方法探讨          下载免费PDF全文

潘广灿  张金来  郜松杰 《探矿工程》2011,38(11):68-70,82

利用不同地层情况的计算实例,分别采用抗剪强度指标厚度加权平均法和附加应力面积法对地基承载力特征值进行计算,对计算结果进行分析,对不同的计算方法的理论原理进行了剖析,提出利用附加应力系数法计算抗剪强度指标标准值的结论。同时提出抗剪强度指标应采用不固结不排水剪指标,当持力层为粉土时应对其抗剪强度指标进行75%的折减的方法和建议。为合理利用抗剪强度指标计算地基承载力特征值提供了有益的参考。  相似文献   

地层温度对科学超深井井壁稳定的影响          下载免费PDF全文

张培丰 《探矿工程》2011,38(10):1-5

井壁稳定问题包括井壁坍塌和地层破裂2种基本类型,科学超深井钻探的目的层是处于高地应力、高地温和高地层压力的深部岩层,井壁稳定问题更加突出。以12000 m科学超深井为例,从地层温度入手,分析钻井液循环温度变化所引起的当量静态钻井液密度和环空压力当量密度的变化,以及温梯应力、温差应力对井壁稳定的影响。  相似文献   

基于Geddes公式计算新型带肋预应力管桩的沉降     

熊厚仁  牛志荣  蒋元海  吴祥松  杨建永 《岩土力学》2011,32(12):3630-3636

在Geddes应力公式的基础上,对新型带肋预应力管桩的环状凸肋产生的影响做了假设:环状凸肋的受力可等效为对其下部土的挤密作用,即产生附加应力;为了方便计算,把该种附加应力简化沿环状凸肋两倍下部长度矩形分布的桩侧摩阻力,并推导出了适合新型带肋预应力管桩单桩沉降的计算公式;然后用Matlab软件进行编程计算。计算结果与现场试验结果相近,可做为工程估算。  相似文献   

上覆压力及排水条件对吹填软土强度影响   总被引：1，自引：0，他引：1  

杨爱武  闫澍旺  杜东菊  赵瑞斌  卢力强  王江宏 《岩土力学》2011,32(1):172-178

吹填土由于其成分来源及沉积环境不同,性质千差万别。以天津海积软土为土质材料,模拟现场吹填环境,研究了吹填软土强度形成影响因素。试验表明,不同的压力及排水条件对吹填软土强度增长影响较大。当排水条件有利于土体中的水排出时,强度增长明显。上覆压力对土体强度增长的影响通过一定的排水条件得以实现,排水条件差和压力增大时,强度增长缓慢且很小,反之,强度增长快且绝对值大。  相似文献